Phoenix Roofing and Solar’s primary goal is to make sure every Lakewood roof replacement is completed with fantastic roofing service at a reasonable price. That’s why we’re on board with the urge to tackle minor house repairs on our own. There is no substitute for the importance of performing your job, after all. With DIY roofing, asphalt shingle replacement is a simple procedure that most Lakewood homeowners can do. Even so, it isn’t failsafe, so it’s a good idea to be aware of potential dangers before you begin. However, to help you avoid the most common errors while replacing asphalt shingles, we’ll guide you through five errors to avoid in the process.
Ripping or Shredding the Shingles that Surround the Area
In order to replace asphalt shingles that are loose or broken, the first step is to remove the problematic ones. It’s critical to work methodically and intentionally while completing this task. The first significant error is to damage the surrounding shingles if you work too hastily or hurriedly. So, replacing a damaged shingle should not be made more complex by adding additional steps.
Failing to Remove the Whole Shingle at Once
Understandably, you’d want to save time by cutting off the broken shingle rather than carefully removing it from the roof. However, this is a blunder, too. If the old shingle isn’t completely removed, replacing it with a new one will be much more challenging. In this case, your roof will be exposed to leaks and blown-off shingles if the new shingle is loose or otherwise incorrectly installed. Even if you have to extract nails from the adjacent shingles, the additional work will pay off in the long run.
Not Filling Nail Holes with Caulk
It’s time to replace the defective shingle after removing the old one. Nail the new shingle in place, careful not to damage the existing one. Take care to avoid making the third main blunder: failing to close nail holes. Nails will keep your shingle in place, but they aren’t waterproof on their own. Nail holes that have not been sealed up provide a pathway for water to enter your roof’s underlayment and make its way down to the decking below.
Failing to Remember to Replace Nails from the Surrounding Shingles
In order to have enough space to work, you may have to remove a few nails from nearby shingles, as previously suggested. That is OK so long as you don’t forget to get new nails at some point later. When nails aren’t replaced, the shingles on your roof will come free. So water may get in, and your roof may even fly off in heavy winds because of this problem.
Failing to Seal the Shingles on Your Roof
Even if your roof’s asphalt shingles have been replaced, you may still not be finished. Sealing new shingles before nailing them down ensures that they won’t come away in the wind and ruin the look of your home. Use shingle mastic to prevent water from penetrating your newly installed shingles.
We Are Here To Help. Get In Touch With Us Today!
We at Phoenix Roofing believe every homeowner should have a few do-it-yourself skills in their arsenal to help with their Lakewood roof replacement. To begin, replacing any damaged asphalt shingles replaced is a good idea. If you do this easy DIY repair, your roof will last longer and cost less money. However, you can always call our roofing crew for help if you don’t want to handle it yourself and are looking for residential roofing services. Thus, to have the job done well the first time, Phoenix Roofing and Solar is the business to contact! Give us a call at (330)-524-8323